Choosing between Lost-Wax Casting and DMLS for 3D printing metal parts. Pros and cons of using these 3d printing methods and when it is better to use them.
![3d-printing-metal-parts](https://assets.ennomotive.com/wp-content/uploads/2019/07/18135751/3d-printing-3-e1563458316466.jpg)
![virtual-power-plants-vpp](https://assets.ennomotive.com/wp-content/uploads/2019/07/16144924/autoconsumo--e1563366147280.jpg)
Gerdo Dalhuizen is the winner of one ennomotive challenge and he has written this article about electric consumption and virtual power plants (VPP).
7/18/2019Mario Honrubia
![go-green-yes](https://assets.ennomotive.com/wp-content/uploads/2019/07/11104948/go-green-1-e1562842425703.jpg)
There is no doubt that both individuals and companies should go green. However, one must be informed about what will actually create an impact.
7/11/2019Mario Honrubia
![convert-used-oil-into-diesel-by-fractional-distillation](https://assets.ennomotive.com/wp-content/uploads/2019/07/10105032/oil-into-diesel-e1562756738101.jpg)
The developed oil treatment method is to separate each component by boiling point. It does not require additives and only heat is used.
7/10/2019Mario Honrubia
![waste-to-energy-heat-challenge](https://assets.ennomotive.com/wp-content/uploads/2019/07/02155547/waste-to-energy-CIECH.jpg)
In this Waste to Energy Challenge, CIECH wants to find new solutions to recover heat/energy from the waste generated during the soda production process.
7/2/2019Mario Honrubia
![repurposed-materials-soda-lime](https://assets.ennomotive.com/wp-content/uploads/2019/06/25141756/CIECH-Soda-Polska-Janikowo-17-copia-2-e1561990773888.jpg)
CIECH, a leading European soda manufacturer, is seeking for new applications for the so-called “post-soda lime” such as new marketable solutions or products
6/28/2019Mario Honrubia
![designing-engineering-prototype](https://assets.ennomotive.com/wp-content/uploads/2019/06/26085731/prototype-cover-e1561540338919.jpg)
Tip: A good enough prototype delivered rapidly would help gauge the customer’s position quicker than building a great prototype, which the client won't like
6/26/2019Mario Honrubia
![reusable-modular-constructions](https://assets.ennomotive.com/wp-content/uploads/2019/06/18133101/modular-construction-e1560867089733.jpg)
The advantages and the potential of reusable and modular constructions are clear in a time where the needs are enormous and the global resources are limited
6/18/2019Mario Honrubia
![power-consumption-optimization-iot](https://assets.ennomotive.com/wp-content/uploads/2019/06/10152750/iot-electricity-optimization-e1560333293448.jpg)
Power Consumption Optimization: Manuel Caldas proved the impact of different design parameters on global power consumption in microcontroller-based devices.
6/12/2019Mario Honrubia